Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterSpring Repair in Long Beach, CA
Garage door spring repair in Long Beach typically costs between $180 and $340, depending on the specific spring type, wire gauge, and the weight of your door, and we can usually complete these repairs on the same day you call us at (562) 373-6685. For a full breakdown of what you might pay, see our guide on How Much Does Garage Door Repair Cost? (2026 Price Guide) - Long Beach, CA. When a spring snaps, your door is effectively locked or stuck in place, which is why we prioritize these calls for our neighbors. If you are dealing with a broken spring, please do not attempt to force the door open or pull on the emergency release while the door is under tension, as this can lead to serious injury or damage to your opener.
I am Otto Reinhardt, and at Otto’s Garage Door, we have been serving this community since 2004. We are locally owned and owner-operated, meaning when you call, you are talking to the person who will actually be arriving at your home. We do not use dispatch centers or call centers. Whether you are dealing with a door that won’t budge in Bixby Knolls or a snapped cable in Belmont Shore, we understand the specific challenges of maintaining garage doors in our coastal climate. Salt air and humidity can accelerate corrosion on metal components, which is why we use high-cycle, oil-tempered springs that are built to last longer in our environment. If your door is acting up beyond just the springs, you can learn more about our full Garage Door Repair in Long Beach services to see how we handle everything from track alignment to opener replacement.
When You Need Spring Repair
A garage door spring is under massive tension, holding the weight of a door that often exceeds 200 pounds. When these springs fail, the symptoms are usually unmistakable. If you notice any of these signs, it is time to call us.
- The loud bang: If you heard a sound like a gunshot or a firecracker go off in your garage, that is almost certainly a spring snapping. It is a startling sound, but it is the most common indicator that your torsion spring has reached the end of its life.
- The door won’t lift: If your garage door opener is struggling to lift the door, or if it starts to lift and then stops immediately, the springs have likely lost their tension. The opener is designed to move the door, not lift its full weight.
- Visible gaps in the coil: If you look at the shaft above your door and see a clear separation or a gap of an inch or two in the spring coils, the spring is broken. Please do not touch it or try to close the gap.
- Uneven door movement: If the door looks crooked as it opens or closes, or if it feels heavy when you try to lift it manually, the springs are likely unbalanced or one has failed entirely.
- Cables dangling: When a spring breaks, the tension that keeps the cables taut is lost. If you see loose, dangling cables on the sides of your door, stay clear and keep pets and children away from the area.
Our Spring Repair Process
When I come out to your home, I follow a strict process to ensure the job is done safely and correctly the first time. We stand by our 90-Day Done Right Promise on every job, and that starts with doing the work right at your house. Here is how we handle a spring replacement:
- Safety Assessment: Before I touch a single bolt, I inspect the entire door system. I check the cables, the rollers, and the brackets to ensure that the failure didn’t cause collateral damage to other parts of the door.
- Proper Measurement: I measure your existing springs using a micrometer to determine the exact wire gauge, inside diameter, and length. I do not guess. Using the wrong spring size makes the door dangerous and puts unnecessary strain on your opener, whether it is a LiftMaster, Genie, or Craftsman model.
- De-tensioning and Removal: I use professional-grade winding bars to safely release any remaining tension on the broken spring before removing it from the torsion tube. This is the most dangerous part of the job, which is why I never recommend homeowners try this themselves.
- Installation and Calibration: I install the new, high-cycle springs and wind them to the exact manufacturer specifications for your door’s weight. A spring that is wound too tight will burn out your motor; a spring that is too loose will cause the door to crash down.
- Balance and Safety Test: Once the new springs are installed, I test the balance of the door. A properly balanced door should stay in place when lifted halfway up. I also check the safety sensors and the travel limits to ensure everything is running smoothly.
Spring Repair Pricing in Long Beach
We believe in upfront pricing that does not change between the phone call and the time I arrive at your driveway for your Garage Door Repair services. We do not believe in hidden fees or “trip charges” within the county. Because every door is different, the cost depends on the specific spring requirements for your setup.
| Service Item | Estimated Price Range |
|---|---|
| Standard Torsion Spring Replacement (Single Spring) | $180 - $260 |
| Dual Torsion Spring Replacement (Both Springs) | $280 - $340 |
| High-Cycle/Heavy Duty Spring Upgrade | $240 - $360 |
| Safety Inspection & Tune-Up (With Repair) | Included |
If you have a written estimate from another company, I offer a Free Second Opinion on that estimate. We also provide a 10% discount for seniors and veterans, as well as $40 off any repair over $200. Call (562) 373-6685 for an exact quote, and I will give you a firm number before I head your way.
FAQs - Spring Repair
Is it cheaper to repair or replace the spring?
You cannot repair a broken garage door spring; it must be replaced. Because springs work in tandem, if one breaks, the other is usually at the same point in its lifespan, so we almost always recommend replacing both to save you the cost of a second service call later.
Can you fix my garage door today?
Yes, we prioritize spring repairs because we know you cannot get your car out of the garage when the spring is broken. When you call us, we will tell you exactly when we can be there, and we arrive on time with the parts needed to get the job done in one visit.
How do I know what size spring I need?
You should not try to measure the springs yourself because they are under extreme tension. I will bring my tools and measure the wire gauge and length when I arrive. If you try to buy springs from a hardware store, you will likely get the wrong size, which can damage your opener or cause the door to fall.
Does the brand of my garage door opener matter?
The springs are attached to the door, not the opener, but they must be balanced correctly so your opener doesn’t have to work harder than it should. If your door is off-balance, you may need Track Realignment as well. Whether you have a Raynor, Wayne Dalton, or Chamberlain opener, the spring system needs to be perfectly calibrated to the door’s weight, not the motor’s power.
When you need someone you can trust, you need a local professional who stands by their work. We have been in this county since 2004, and we are not going anywhere. If you are stuck, give us a call at (562) 373-6685. We will get your door moving again, safely and quickly. If you just need a quick reference, you can always head back to our home page to see everything we do.
Written by Otto Reinhardt, Owner at Otto’s Garage Door, serving Long Beach.